2017 Kia Sorento Check Engine Light

If you’re experiencing a 2017 Kia Sorento check engine light on your car, it’s important to have the issue diagnosed and repaired promptly to avoid potential damage and costly repairs. Learn about common reasons for the warning light and what steps to take to address the issue.

How Often Sould the 2017 Kia Sorento Check Engine Light Be Checked?

There is no set schedule for checking the 2017 Kia Sorento check engine light. However, it’s recommended that you check the light periodically to ensure that it’s functioning properly and that there are no issues with the vehicle’s onboard diagnostic system.

If the check engine light comes on in your 2017 Kia Sorento, it’s important to have the vehicle diagnosed by a qualified mechanic as soon as possible. Once the issue has been identified and repaired, it’s recommended that you check the light periodically to ensure that it doesn’t come back on.

Additionally, if you notice any other issues with your vehicle, such as a decrease in performance or gas mileage, it’s a good idea to have the check engine light checked to ensure that there are no underlying issues. Regular maintenance and monitoring can help ensure that your vehicle is running smoothly and efficiently.

What Are Some Common Reasons Why the 2017 Kia Sorento Check Engine Light Might Illuminate?

There are several common reasons why the 2017 Kia Sorento check engine light might illuminate. Some reasons include:

1. Faulty oxygen sensors: The oxygen sensor measures the amount of oxygen in the vehicle’s exhaust system and sends this information to the vehicle’s onboard computer. If the sensor is faulty, it can cause the 2017 Kia Sorento check engine light to come on.
2. Loose or damaged gas cap: A damaged or loose gas cap can cause the vehicle’s emissions system to malfunction, which can cause the check engine light to come on.
3. Faulty catalytic converter: The catalytic converter helps reduce the emissions produced by the vehicle’s engine. If it fails, it can cause the check engine light to come on.
4. Faulty spark plugs: Worn spark plugs and plug wires are responsible for igniting the fuel in the engine. If they are faulty or worn out, they can cause the check engine light to come on.
5. Malfunctioning mass air flow sensor: The mass air flow sensor measures the amount of air entering the engine and sends this information to the vehicle’s onboard computer. If the sensor is faulty, it can cause the 2017 Kia Sorento check engine light to come on.
6. Dead or faulty battery: A dead or faulty battery can cause the check engine light to come on, as it can disrupt the vehicle’s onboard computer system.
7. Issues with the vehicle’s transmission: Transmission issues can cause the check engine light to come on, as the vehicle’s onboard computer may detect a problem with the transmission.

If the 2017 Kia Sorento check engine light comes is flashing, it’s important to have the vehicle check engine light diagnosis by a aouto repair shop as soon as possible to identify the underlying issue and take appropriate action to resolve it. It is not safe to drive in this situation.

How Can I Reset the 2017 Kia Sorento Check Engine Light After the Issue Has Been Fixed?

After the issue that caused the flashing check engine light to come on in your 2017 Kia Sorento has been fixed, you may want to reset the light to turn it off. Here are the steps you can follow to reset the warning light:

1. Make sure the ignition is turned off and the key is removed from the ignition.
2. Locate the fuse box under the dashboard on the driver’s side of the Kia.
3. Remove the fuse for the electronic control module, which is labeled as “ECM.”
4. Wait for approximately 5 minutes and then reinsert the fuse.
5. Turn the ignition switch to the “on” position, but do not start the Sorento’s engine.
6. Wait for the check engine light to turn off, which may take up to 30 seconds.
7. Turn the ignition switch to the “off” position and remove the key.

After following these steps, the 2017 Kia Sorento check engine light should be reset. However, it’s important to note that if the underlying issue that caused the check engine light to come on has not been fully resolved, the light may come back on again. It’s recommended to have the vehicle inspected by a qualified mechanic to ensure that the issue has been fully resolved before attempting to reset the check engine light.

What Are Some of the Potential Consequences of Driving With the 2017 Kia Sorento Check Engine Light?

Driving with the 2017 Kia Sorento check engine light can have several potential consequences. Some of the most significant consequences include:

1. Reduced fuel efficiency: The check engine light can come on if there is a problem with the vehicle’s emissions system or fuel system, which can lead to reduced fuel efficiency. This means you may have to spend more money on gas over time.
2. Risk of engine damage: Ignoring the check engine light can put your engine at risk of damage. The light may be indicating a serious issue, such as a malfunctioning catalytic converter, which can cause damage to your engine if left unresolved.
3. Increased emissions: If the check engine light is related to the emissions system, driving with the light on can cause your vehicle to emit more pollutants into the environment. This can result in a negative impact on air quality and potentially harm the environment.
4. Failure to pass emissions tests: Many states require emissions testing to be passed in order to renew a vehicle’s registration. If the check engine light is on, your vehicle may not pass the emissions test, resulting in your inability to renew your registration until the issue is resolved.
5. Safety hazards: Some issues that trigger the check engine light can be safety hazards. For example, if the light is on due to a malfunctioning transmission, it can cause your vehicle to stall or lose power unexpectedly, which can lead to accidents or other dangerous situations.

Overall, it’s important to take the 2017 Kia Sorento check engine light seriously and have your Kia Sorento inspected by a service center as soon as possible to identify and address any underlying issues.

Are There Any Codes for the Spesific 2017 Kia Sorento Check Engine Light Issues and How Can I Diagnose and Repair Them?

Yes, there are specific diagnostic trouble codes (DTCs) that correspond to the check engine light issues in a 2017 Kia Sorento. These codes can help identify the specific component or system that is causing the problem.

The first step in diagnosing and repairing a check engine light codes is to retrieve the trouble codes using an OBD-II scanner. This scanner can be plugged into the OBD-II port under the dashboard of your vehicle, and it will read the codes and display them on the screen.

Once you have retrieved the codes, you can use them to identify the specific component or system that is causing the issue. Some common 2017 Kia Sorento check engine light issues include:

• P0171 and P0174: These codes indicate that the engine is running too lean, which can be caused by a vacuum leak, dirty or faulty mass air flow sensor, or a failing oxygen sensor.
• P0420 and P0430: These codes indicate a problem with the catalytic converter, which can be caused by a faulty oxygen sensor, engine misfire, or other issues.
• P0300: This code indicates random engine misfires, which can be caused by a variety of issues, including a faulty ignition coil, spark plug, or fuel injector.
• P0442: This code indicates a problem with the evaporative emissions system, which can be caused by a loose or damaged gas cap, faulty charcoal canister, or other issues.

Once you have identified the specific code and underlying issue, you can take steps to repair or replace the affected component or system. In some cases, this may require professional help from a qualified mechanic, especially if the issue involves complex systems or requires specialized tools.